Edirol Canvas SD-20 Manual Del Usuario página 50

Getting connected and installing drivers (Macintosh)
4
The first time the software is started up, a dialog box saying "Welcome to
FreeMIDI!" will appear. Click [Continue].
5
When the FreeMIDI Preferences dialog box appears, click [Cancel].
6
When the About Quick Setup dialog box appears, click [Cancel].
7
From the File menu, choose Open.
8
Select SD-20 USB from the FreeMIDI Settings folder you copied in step 1,
and click [Open].
9
Verify that MIDI transmission and reception occur correctly.
From the MIDI menu, choose Check Connections.
fig.3-13_40
10
The mouse cursor will change to the
shape of a note. Click the sound
generator icons encircled in the
diagram at right.
If you hear sound, MIDI messages are
being sent from the Macintosh to the
SD-20.
Does the OUTPUT level indicator of the SD-20 move?
If the OUTPUT level meter in the SD-20's display is moving but you do not
hear sound, check whether the volume of the SD-20 or your speaker system
has been lowered. If the OUTPUT level meter does not move, check the
connections and OMS settings once again.
After you have made settings correctly, choose Test once again from the
Studio menu, and perform step 10.
11
Once again choose the MIDI menu command Check Connections to end
the test.
12
From the File menu, choose Quit to exit FreeMIDI Setup.
This completes connections for the SD-20 and Macintosh, and installation of
the MIDI driver. Now, MIDI data can be input and output (recorded and
played).
50
If the SD-20 does not
produce sound, refer to No
sound (p. 237).