Which Serial Port Should I Use; How Many Midi Out Ports Can I Use; Using Flow Control - Edirol Canvas SD-20 Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Which serial port should I use?

Most computers let you use up to four serial ports (COM1--COM4).
In the "COM Ports" field, select the serial port (COM port) that you will use to connect your sound
module.
Be aware of two points.
• You must use a serial port that is not being used by another device.
• You must use the serial port that corresponds to the serial connector to which your sound module
is connected.
Computer
Serial port
COM1
COM2
Serial connector 1
Sound
Module
To determine which serial port corresponds to the serial connector to which your sound module is
connected, refer to the owner's manual for your computer or contact the manufacturer of your
computer. Depending on the internal connections of your computer, the serial connector may not
be connected to any of the serial ports (COM1--COM4). In this case, refer to the owner's manual for
your computer, and change the settings.

How many MIDI OUT ports can I use?

If [Use multiple ports] is checked, you will be able to use the multiple ports of the SD-20 from your
computer via the Roland serial MIDI driver.
When you use multiple ports, you will be able to use two MIDI OUT devices and two MIDI IN
devices from your computer.
Select [SD-20] in the "Sound module" field. With this setting, you will be able to use two MIDI OUT
ports and two MIDI IN ports from your computer.

Using flow control

The SD-20 supports CTS/RTS Flow Control, a control function that temporarily pauses data
transmission/reception. By checking [Activate CTS/RTS Flow Control], you may be able to avoid
problems with transmitting performance data.
In the diagram at left, COM3 and Com4 are already used by
COM3
COM4
other devices, and cannot be used for the serial MIDI driver.
COM1 and COM2 are not used by any other device, but in
Internal
modem
this case, the serial connector corresponds to COM1, so you
should select COM1 in the "COM Ports" field.
Serial connector 2
Mouse
Roland Serial MIDI Driver
MIDI device name
Roland Serial MIDI Out A
Roland Serial MIDI Out B
Roland SD-20
Roland SD-20 MIDI IN
SD-20
Computer
cable
Part group A
Part group B
Troubleshooting
243
Tabla de contenido
loading

Tabla de contenido