Using The Cable Ties; Installing Batteries - Sony VPL-FHZ700L Manual De Referencia Rápida

1
Open the index.html file in the CD-
ROM.
2
Select and click on the manual that
you want to read.
Note
If you have lost or damaged the CD-ROM, you
can purchase a new one from your Sony dealer
or Sony service counter.

Installing Batteries

Two size AA (R6) batteries are supplied for
RM-PJ27 Remote Commander.
To avoid risk of explosion, use size AA (R6)
manganese or alkaline batteries.
1
Remove the lid, then install the two
AA (R6) batteries (supplied) with the
correct polarity.
While pressing the lid,
slide it.
2
Replace the lid.
CAUTION
Danger of explosion if battery is incorrectly
replaced.
Replace only with the same or equivalent
type recommended by the manufacturer.
When you dispose of the battery, you must
obey the law in the relative area or country.
Be sure to install
the battery from the
#
side.

Using the Cable Ties

1
Aim the supplied cable tie in a
horizontal direction with respect to the
front face of the projector then insert
the cable tie through the hole at the
bottom.
Be sure to insert the cable tie in fully
until it clicks.
Front direction
of the projector
2
Bundle the cables and cords with
attached cable tie.
When you remove the cable tie
Rotate 90 degrees the cable tie.
Checking the Supplied Accessories
Cable tie
Hole of bottom
11
GB