Troubleshooting; Transportation And Storage - Husqvarna 122C Manual De Usuario

To add grease to the bevel gear
• Make sure that the bevel gear is filled ¾ full with
bevel gear grease.
The engine does not start
Check
Starter pawls.
Fuel tank.
Spark plug.
The engine starts but stops again
Check
Fuel tank
Air filter
• Always allow the product to cool down before
storage.
• For storage and transportation of the product and
fuel, make sure that there are no leaks or fumes.
16

Troubleshooting

Possible cause
The starter pawls cannot move freely.
Incorrect fuel type.
The spark plug is dirty or wet.
The spark plug electrode gap is incorrect.
The spark plug is loose.
Possible cause
Incorrect fuel type.
The air filter is clogged.

Transportation and storage

Procedure
Remove the starter cover and clean around
the starter pawls.
Let an approved servicing dealer help you.
Drain the fuel tank and fill with correct fuel.
Make sure that the spark plug is dry and clean.
Clean the spark plug. Make sure that the
electrode gap is correct. Make sure that the
spark plug has a supressor.
Technical data on page 17 for cor-
Refer to
rect electrode gap.
Tighten the spark plug.
Procedure
Empty the fuel tank and fill it with correct fuel.
Clean the air filter.
Sparks or open flames, for example from electrical
devices or boilers, can start a fire.
• Always use approved containers for storage and
transportation of fuel.
941 - 004 - 10.04.2019