Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Measuring resistances
1. Connect the red testing point to "V Ohms
mA" and the black testing point to "COM".
2. Turn the knob on the ohmmeter function.
Choose the correct range and take
measurements:
• When there is an open circuit in the display
will show "1" as in the over-range condition.
In this case select a higher range.
• For values of 1M or more, the device may
take a few seconds to stabilize, which is
normal.
• When you check resistance in the circuit
be careful that these are de-energized and
the capacitors are fully discharged.
7 7
Tabla de contenido
