Measuring Resistance - Steren MUL-450 Manual Del Usuario

MEASURING RESISTANCE

1.- Connect the red testing point to the jack signaled "V Ω"
and the black testing point to the jack signaled "COM".
2.- Set the dial to Ohms (Ω)
3.- Press the RANGE button and select automatic or manual
4.- If the measured resistance is connected to a circuit, turn it off
and discharge the capacitors before to measure.
5.- Connect the testing points to the resistance to be measured.
6.- The resistance value will appear on the LCD display.
If you want hold the value, press the HOLD button.
ENGLISH-10