Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Measuring DC and AC current
1. Connect the red testing point to the jack
signaled "V Ohms mA" and the black
testing point to the jack signaled "COM".
2. Turn the knob to the maximum setting
and reduce level by level depending on
the reading.
This function it is protected by a 2
A / 250 V fuse, however, pay special
attention to the range of 10 A, as it is not
protected.
When using this range, the maximum
reading must be 10 A, but not more than
15 s. or you can damage the internal
resistances.
6 6
Tabla de contenido
