Making the connections
Connect the AC mains lead only after all the other
connections have been made.
1
Connect the FM indoor antenna.
Put the antenna where reception is best.
For the United Kingdom and Ireland
Connect the FM outdoor antenna.
Use an outdoor antenna if reception is poor.
Antenna plug adaptor
CAUTION!
Keep the antenna plug adaptor out of reach of
children to prevent swallowing.
Note:
•
Do not use the outdoor antenna during a lightning
storm.
•
Disconnect the outdoor antenna if you do not use the
system.
Adhesive tape
(not supplied)
FM outdoor antenna
(not supplied)
75 Ω coaxial cable
(not supplied)
2
Connect the AC mains lead.
Do not use any other AC mains leads except the
supplied one.
(For the AC mains plug of three pins)
READ THE "Caution for AC mains lead" BEFORE
CONNECTION.
To household
mains socket
Attaching the ferrite core near to the terminal
A
Pull on the tabs (both sides)
to open.
B
Put the AC mains lead onto
one of the concave surfaces.
C
Coil the AC mains lead
around the ferrite core and
onto the other concave
surface.
D
Close the ferrite core until it
clicks.
Note:
Failure to attach the ferrite core to
the AC mains lead may cause
interference to other devices
nearby.
Conserving power
The system consumes a small amount of power even
when it is in standby mode. Disconnect the power
supply if you do not use the system.
Some settings will be lost after you disconnect the
system. You have to set them again.
5
5