Tabla de contenido
Idiomas disponibles
Idiomas disponibles
How to move machine (Fig. 50)
• Raise handle to enable movement of machine.
• During transportation the saw band guard should be fully down
and close to the table.
• Do not use guarding for handling or transportation.
CAUTION:
• If handle is raised too high, the machine may topple over.
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and unplugged before
attempting to perform inspection or maintenance.
NOTICE:
• Never use gasoline, benzine, thinner, alcohol or the like.
Discoloration, deformation or cracks may result.
Cleaning
Clean out sawdust and chips from time to time. Carefully clean the
blade guard and moving parts inside the band saw.
Lubrication
To keep the band saw in tip-top running condition, and to assure
maximum service life, oil or grease the moving parts and rotating
parts from time to time.
To reduce the emitted noise, always be sure that the blade is sharp
and clean.
To maintain product SAFETY and RELIABILITY, repairs, any other
maintenance or adjustment should be performed by Makita
Authorized Service Centers, always using Makita replacement
parts.
OPTIONAL ACCESSORIES
CAUTION:
• These accessories or attachments are recommended for use
with your Makita tool specified in this manual. The use of any
other accessories or attachments might present a risk of injury to
persons. Only use accessory or attachment for its stated
purpose.
If you need any assistance for more details regarding these
accessories, ask your local Makita Service Center.
• Band saw stand
• Hex wrench
• Rip fence
• Miter gauge
• Circular cutting attachment
• Extension table
• Belt sanding attachment
NOTE:
• Some items in the list may be included in the tool package as
standard accessories. They may differ from country to country.
For European countries only
Noise
The typical A-weighted noise levels are
sound pressure level: 81 dB (A)
sound power level: 94 dB (A)
Uncertainty (K): 3 dB (A)
Wear ear protection.
These values have been obtained according to EN61029.
16
EC DECLARATION OF CONFORMITY
For European countries only
The EC declaration of conformity is included as Annex A to this
instruction manual.
Tabla de contenido
