Specific Safety Rules; Functional Description - Makita 6842 Manual De Instrucciones

ENGLISH
1 Lock button
2 Switch trigger
3 Reversing switch lever
4 Hook
5 Clamping screw
6 Casing
7 Thumb screws
8 Plain bearing
9 Dust cover
SPECIFICATIONS
Model
Screw strip ....................................... 4 mm x 25 mm – 55 mm
-1
No load speed (min ) ...................... 4,700
Overall length .................................. 400 mm
Net weight ........................................ 2.0 kg
Safety class ......................................
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product
(gained from repeated
adherence to screwdriver safety rules. If you use
this power tool unsafely or incorrectly, you can
suffer serious personal injury.
1. Hold power tools by insulated gripping surfaces
when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal
parts of the tool "live" and shock the operator.
2. Always be sure you have a firm footing. Be sure
no one is below when using the tool in high loca-
tions.
3. Hold the tool firmly.
4. Keep hands away from rotating parts.
5. Do not touch the bit or the workpiece immedi-
ately after operation; they may be extremely hot
and could burn your skin.
SAVE THESE INSTRUCTIONS.
Explanation of general view
10 Bit
11 Lever
12 Stopper base
13 Label on feeder box
14 Fenestella
15 Adjusting knob
16 Feeder box
17 Screw strip
18 Screw guide
6842
/II
GEB017-1
use) replace strict
19 Driving position
20 Reverse button
21 Extension handle
22 Wall
23 Limit mark
24 Brush holder cap
25 Screwdriver
6843
4 mm x 25 mm – 55 mm
6,000
400 mm
2.0 kg
/II
WARNING:
MISUSE or failure to follow the safety rules stated
in this instruction manual may cause serious
personal injury.

FUNCTIONAL DESCRIPTION

CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action (Fig. 1)
CAUTION:
• Before plugging in the tool, always check to see that
the switch trigger actuates properly and returns to the
"OFF" position when released.
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger and then
push in the lock button.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
Reversing switch action (Fig. 2)
This tool has a reversing switch to change the direction of
rotation. Depress the reversing switch lever from the A
side for clockwise rotation or from the B side for counter-
clockwise rotation.
CAUTION:
• Always check the direction of rotation before operation.
• Use the reversing switch only after the tool comes to a
complete stop. Changing the direction of rotation
before the tool stops may damage the tool.
6844
4 mm x 45 mm – 75 mm
3,000
440 mm
2.1 kg
/II
5