Bosch GLM 50 C Instrucciones De Funcionamiento página 27

C at which you took the measurement will display in
the measured-value lines d.
b. Double indirect height measurement
The laser measure can measure a vertical distance on
a surface, by taking two indirect measurements to that
surface.
Press the function button 7 [Func] and use the plus
button 3 [ ] or minus button 8 [ ] to cycle through
the measurement functions until the highlighted
square appears over the indicator for indirect mea-
surement
status bar. Press the measure button 2 [ ]. Press
the plus button 3 [ ] or minus button 8 [ ] to cycle
through the indirect measurement functions until the
highlighted square appears over the indicator for dou-
ble indirect height
appear in the status bar. Press the measure button 2
[ ] to select double indirect height measurement.
4'02"
0.0°
8'05"
45.0°
6'02" ⁄
e. The measuring values for the distances A and B and
the angle C at which you took the measurement will
display in the measured-value lines d.
c. Indirect Length measurement
Press the function button 7 [Func] and use the plus
button 3 [ ] or minus button 8 [ ] to cycle through
the measurement functions until the highlighted
square appears over the indicator for indirect mea-
surement
status bar. Press the measure button 2 [ ]. Press
the plus button 3 [ ] or minus button 8 [ ] to cycle
through the indirect measurement functions until the
highlighted square appears over the indicator for indi-
and the word "Indirect" appears in the
and the words "Double Height"
Press the measure button 2 [ ] to ac-
tivate the laser. Make sure the measur-
ing reference point remains stable.
⁄
Press the measure button 2 [ ] to
take the first measurement A. Press
the measure button 2 [ ] to take the
second measurement B.
The desired indirect height measure-
ment X will display in the result line
and the word "Indirect" appears in the
(see figure D)
-27-
(see figure C)