Bosch GLM 50 C Instrucciones De Funcionamiento página 15

Automatic switch-off after approx.
– Laser
– Laser measure (without mea-
surement)
Degree of protection
Batteries
Battery life, approximately
– Individual measurements
– Real time measuring
Data transmission
Bluetooth®
The working range increases depending on how well the laser
A
light is reflected from the surface of the target (scattered, not
reflective) and with increased brightness of the laser point to the
ambient light intensity (interior spaces, twilight). In unfavorable
conditions, e.g., with extreme illumination or a badly reflecting
surface, the measuring range may be limited.
In favorable conditions, a deviation influence of ±0.05 mm/m
B
must be taken into account. In unfavorable conditions, e.g.,
with extreme illumination, badly reflecting surface or the room
temperature deviating heavily from 77 °F (25 °C), the maximum
deviation can be up to ±3.0 mm. Additionally, a deviation influ-
ence of 0.15 mm/m must be taken into account.
After calibration at 0° and 90° with an additional grade error of
C
±0.01°/degree to 45° (max.).
Left side of the tool is the reference side for inclination
D
measurement.
At 77 °F (25 °C ) operating temperature.
E
In the real time measuring function, the maximum operating
F
temperature is 104 °F (40 °C).
20 s
5 min
IP 54 (dust and
splash proof)
2 x 1.5 V AAA
(LR03)
10,000
2.5 h
Bluetooth® 4.0
(Classic and Low
Energy)
-15-
G
H
J
H
H
K