Navigation; Settings Button - Vermeiren SE04 Manual De Instrucciones

4.3.1 Charging
•
Driving is prevented (inhibited) while the system is being charged.
•
Charging is possible without switching the operating console ON. To see the battery
status indicator, switch it ON.
Plug the battery charger into the remote's XLR socket (9), see Figure 1.
The battery status indication now turns into a charge indication, see
figure 5. The battery charging state is shown by the yellow or green
blocks.
After a few seconds, the operating console turns to power-save mode
and the screen illumination decreases. Touching a button or the joystick
on the chin controller turns normal illumination on.
4.4

Navigation

There are 2 main menus to view on the touchscreen:
• S-menu for adjusting the body position, see §4.8.
• D-menu for changing the drive functions, see §4.9.
Each main menu has separate submenus.
Once the operating console has been switched ON, you can navigate through the screens/menus.
1. To navigate between the S and D menus, press the blue chin controller button (15, see Figure
2) for 2-3 seconds. Repeat until the desired menu is shown on the screen.
2. To select a specific submenu, shortly press the blue chin controller button until the desired
submenu is shown on the screen.
Navigation between and within the menus is also possible by swiping and tapping the touch
screen.
Navigating and altering the settings on the operator console is only possible by swiping and
tapping the screen. The chin controller can not be used for this.
Use the set key on the screen to get an overview of the navigation structure.
4.5

Settings button

The settings button (K) is displayed in each menu screen. With this button, the screen view can
be changed, a popup screen can be opened, and settings can be changed.
• To toggle between full screen view and menu-scroll view, tap the settings button shortly.
• To open the pop-up screen, hold your finger on the settings button for 4 seconds.
This pop-up screen can also be opened/closed by pressing menu button I (4) for 4 seconds.
Battery-charging indication
9
SE04
2019-11
Operating console functions
EN
NL