Listening To Audio From A Bluetooth ® Device; Connecting Via Bluetooth ® Menu - Panasonic SC-NT10 Instrucciones De Funcionamiento

Listening to audio from a Bluetooth
Preparation
While charging this unit or after charging this unit, turn on the Bluetooth
the device and place the device near this unit.
If you intend to use an NFC (Near Field Communication)-compatible Bluetooth
device, proceed to
Connecting via Bluetooth
For each Bluetooth
first.
∫ Pairing with Bluetooth
1 Press [Í/I] to turn this unit on.
• The Bluetooth
• If this unit is being used for the first time (factory preset state):
The Bluetooth
→ Skip to step 3.
2 Press and hold [
fast.
• The unit will enter pairing standby.
3 Select "SC-NT10" from the Bluetooth
menu.
• When the Bluetooth
on the unit lights up.
• If prompted for a passkey, input "0000".
• If the Bluetooth
®
Bluetooth connecting setting, operate both settings.
4 Start playing back music, a movie, etc. on your Bluetooth
device.
• Adjust the volume using the [VOL -/VOL +] buttons on the unit.
When the maximum or minimum volume is reached, you will be notified by a beep
sound.
∫ Listening to audio from a paired device
When this unit is turned on, the Bluetooth
that the unit is in connection standby mode. Please perform Steps 3 and 4.
• When the power is turned on, this unit is connected to the last-used Bluetooth
point, please perform Step 4.
One-Touch Connection (Connecting by NFC)" (
"
®
®
device you want to connect to via Bluetooth
®
device
®
indicator (blue) blinks slowly.
®
indicator (blue) blinks fast. → The unit will enter pairing standby.
] until the Bluetooth
®
device is paired and connected, the Bluetooth
®
device need to operate the Bluetooth
®
menu
®
indicator (blue) blinks
®
device's Bluetooth
®
pairing setting and the
®
indicator (blue) will blink slowly indicating
device
®
feature of
8).
®
, perform pairing
®
®
indicator (blue)
®
®
device. At this
®
7
7