Sound Controls - Pioneer X-EM26 Manual De Instrucciones

• If you select [AUTO], this unit turns off automatically
after a CD or USB device playback ends.
∫ Routing audio from other devices
CAUTION
• We will not accept responsibility for damage arising from
the connection of equipment manufactured by other
companies.
Through the AUDIO IN socket
ANTENNA AUDIO IN SPEAKERS
R
FM
1 Connect a stereo mini-plug cable
(commercially available) to
• the AUDIO IN socket on the rear panel of the main unit,
and
• the headphones socket on the external device (for
example, an MP3 player).
2 Press INPUT on the remote control or INPUT
repeatedly on the main unit to switch the
source to [AUDIO IN].
3 Play the external device.
∫ USB 500 mA charge
The USB terminal on this unit has a 500 mA output. A USB
device up to 500 mA can be connected and used/charged.
Battery charging starts when the USB device is connected to
the (USB) port on the unit.
Notes on charging USB devices with this system
• You cannot use the system as a battery charger when
the system is off.
• Battery charging may not be possible depending on the
specifications of the USB device.
∫ Setting the Bluetooth signal on or off
1 Press and hold:6 and
unit for 5 seconds.
2 Release the button when [BT OFF] (Bluetooth
signal off) or [BT ON] (Bluetooth signal on) is
displayed.
• You cannot pair this unit with Bluetooth-enabled
devices when this unit is off.

∫ Sound controls

P.Bass control
When the power is first turned on, the unit will enter the
P.bass mode which emphasises the bass frequencies. To
cancel the P.bass mode, press the P.BASS on the remote
control.
14
En
L
on the main