Connecting To An External Signal Source - Insignia NS-LCD15-09 Guia Del Usuario

Insignia NS-LCD15-09 15.6" LCDTV 720P

Connecting to an external signal source

You can connect a DVD, VCD, VCR, or STB
using a variety of methods, including composite
cables, component cables, an S-Video cable, or
an HDMI cable. The S-Video cable does not
carry sound. If you use an S-Video cable, you
need to use audio cables to connect the audio
output.
Warning
Make sure that you turn off and unplug your TV
before connecting devices.
Note
For better video, use the S-Video jack if your
device has an S-Video connection. For best video,
use the HDMI jack if your device has an HDMI
connection.
To connect an external signal source:
1 For composite video—Plug the audio/video
cable into the AUDIO L, AUDIO R (6), and
VIDEO IN (2) jacks on the back of your TV,
then connect the other ends to the
corresponding jacks on the external signal
source.
Or
For S-Video—Plug in the audio cables as
described above, then plug one end of an
S-Video cable into the S-Video (3) jack on
the back of your TV, then plug the other end
into the S-Video jack on the external signal
source.
Or
For component video—Plug the Y, Pb, and
Pr video cables (5) and the Audio L and
Audio R cables (4) into the COMPONENT
jacks on the back of your TV, then plug the
other ends of the cables into the
corresponding jacks on the external signal
source.
Or
For HDMI—Plug one end of an HDMI cable
into the HDMI jack (1) on the back of your
TV, then plug the other end into an HDMI
device.
6
2 Turn on your TV.
3 Press INPUT repeatedly to select the
4 Turn on external signal source.
5 Insert a disc or videotape into the external
www.insignia-products.com
5
external signal source you want to watch.
signal source, then press PLAY.
1
2
VGA AUDIO
3
SPDIF
4
7