Connecting To An External Signal Source; Connecting A Computer - Insignia NS-LCD19 Guia Del Usuario

Insignia NS-LCD19 19" LCD TV
To connect cable TV with a
converter/descrambler box:
• Use the following illustration to connect a
converter/descrambler box. (The RF switch
and the signal splitter are not provided.)
Set the RF switch to the A position to watch
unscrambled channels using your TV remote
control. Set the RF switch to the B position to
watch scrambled channels using the
converter/descrambler controls.
RF switch
A
B
Out
TV
Cable converter/descrambler box

Connecting to an external signal source

You can connect a DVD, VCD, VCR, or STB
using a variety of methods, including composite
cables, component cables, an S-Video cable, or
an HDMI cable. The S-Video cable does not
carry sound. If you use an S-Video cable, you
need to use audio cables to connect the audio
output.
Warning
Make sure that you turn off and unplug your TV
before connecting devices.
Note
For better video, use the S-Video jack if your VCR
has an S-Video connection.
To connect an external signal source:
1 For composite video—Plug the audio/video
cable into the AUDIO L, AUDIO R, and
VIDEO in jacks on the back of your TV.
- OR -
For S-Video—Plug in the audio cables as
described above, then plug one end of an
S-Video cable into the S-Video jack on the
back of your TV and the other end into the
S-Video jack on external signal source.
- OR -
For component video—Plug the Y, Pb, and
Pr video cables and the Audio L and Audio R
cables into the component input jacks.
- OR -
For HDMI—Plug one end of an HDMI cable
into the back of the TV and the other end into
an HD DVD player.
2 Turn on your TV.
3 Press the INPUT button repeatedly to select
the external signal source you want to watch.
4 Turn on external signal source.
5 Insert a disc or videotape into the external
signal source, then press the PLAY button.
Two-set signal splitter
In
www.insignia-products.com
TV
POWER
Headphone
Video5
HDMI
input

Connecting a computer

Warning
Make sure that you turn off and unplug your TV
before installing devices.
To connect a computer:
1 Plug a VGA cable from your computer into
the VGA jack on the back of your TV.
2 Plug an audio cable from your computer's
audio out jack into the AUDIO jack on the
back of your TV.
3 Plug in and turn on your TV.
W R
Y W
Digital coaxial
audio out
Video3
Video1
Component input
Composite input
rear
7