RS Pro IDM201N Manual De Las Instrucciones página 13

(5) Continuity
The internal sounder activates if the resistance of the circuit under test is less than 20Ω. It will then turn off if the resistance is increased beyond 50Ω.
Response time is approximately 50 msec. overload Protection: 600V dc/ac rms max.
(6) Capacitance
Range
2nF *3
20nF
200nF
2µF
20µF
200µF
2mF *1
*1 <100 dgt of reading rolling.
*2 The accuracy is specified with the backlight not activated.
*3 For accurate readings, do not use the mains power supply when measuring low-value capacitance.
*4 In order to ensure the best accuracy in measurement of a low value capacitance, note and subtract the stray capacitance
of the open-circuit test leads from subsequent measurements.
(7) frequency
Range
2000Hz
20KHz
200KHz
2MHz
20MHz
* Less than 20Hz the sensitivity is 1.5V rms.
** Max. Sensitivity: <5 Vac rms.
Resolution
1pF
10pF
100pF
1nF
10nF
100nF
1µF
Resolution ** sensitivity
1Hz
10Hz 100mV rms *
100Hz
1KHz 250mV rms
10KHz 1V rms
accuracy over voltage protection
±(1.9% + 20d)
±(1.9% + 8d)
±(1.9% + 8d) *2
accuracy
0.01% ± 2d
600V dc or
600V rms
overload protection
600V rms
13