Sony BRAVIA KDL-22EX350 Manual De Instrucciones página 59

Step 6: Install the TV on the Base Plate
Refer to the Instructions for SU-WL100.
1
Connect the cables to the corresponding inputs on the rear of the TV.
For details on the cable connection, see "Connecting Other Equipment" on page 15.
2
Install the TV onto the Base Plate.
x Hook locations diagram
Install the TV onto the location "b" of the Base Plate.
• When using an electric screwdriver to tighten the screws, the torque must be approximately 1.5
N·m {15 kgf·cm}. Do not lift the Mounting Hook before the screws (two screws each for left /right)
are secured.
b
59
US