Connect The Wiring; Install The Filters - Kenmore 233.5139 Serie Manual De Uso

WARNING: Risk of electric shock. Electrical wiring
must be done by qualifi ed personnel in accordance
with all applicable codes and standards. Before
connecting wires, switch power off at service panel
and lock service disconnecting means to prevent
power from being switched on accidentally.
1. Connect House Power Cable to range hood wiring: BLACK
to BLACK, WHITE to WHITE and GREEN or bare wire
under GREEN ground screw.
2. Reinstall wiring cover and attach it to the hood using
its retaining screw.
CAUTION: Ensure both tabs on inner top of hood are
!
engaged in their corresponding slots in wiring cover.
Also, take care not to pinch wires while reinstalling
wiring cover.
Ducted Installation Only:
Re-install grease fi lters removed in step 1 on page 7, under
"Prepare the Hood".

CONNECT THE WIRING

INSTALL THE FILTERS

Non-ducted Installation Only:
Purchase two non-ducted fi lters (see part number in Service
parts list). Attach the non-ducted fi lters following instructions
packed with the non-ducted fi lters.
15
HOUSE
POWER
CABLE
"Non-ducted Filters" available by calling
1-844-553-6667
MOTOR
GROUND
WIRE
GROUND
SCREW
TABS ON
INNER TOP
OF HOOD
SCREW
ENGAGED IN
WIRING
COVER SLOTS.