Tabla de contenido
Idiomas disponibles
Idiomas disponibles
FRAMELESS CABINET
Refer to the marking on the brackets to determine the
correct installation side and orientation.
7/64"
3 X
Align the corresponding bracket to the cabinet side,
while placing rear end of bracket against the wall.
Draw a line on the outer edge of the bracket (as shown).
Slide the bracket towards the center of cabinet and
align the outside edge of the bracket with the marked
line, keeping the rear end edge leaning on the wall.
Use a pencil to mark 3 holes.
Remove the bracket. Using a 7/64" drill bit, drill 3 holes
where marked.
Assemble the bracket to the cabinet bottom using a
Phillips screwdriver and 3 provided countersunk wood
screws. Repeat for the other cabinet side
.
12
Capítulos
Tabla de contenido
