Activating/Deactivating The Alarm; Temperature Display - Hama RC 150 Instrucciones De Uso

Note – Day of the week
• You can choose from English (GB), French (FR), German (DE), Spanish (ES) and
Italian (IT) for the display of the day of the week.
5.4. Alarm
Setting the alarm time
• Press and hold the button (3) for approx. 2 seconds until the hours display (B –
10) begins to flash.
• Set the following information in the order listed:
• Hours
Alarm time (B – 10)
• Minutes
• To select the individual values, press the
confirm your selection by pressing the
• If you do not make an entry for 30 seconds, the device automatically exits the
settings mode and the settings you made are saved.
• Press the button (3) to display the set alarm time for approx. 5 seconds.

Activating/deactivating the alarm

• Move the ALARM ON/OFF slide switch (4) to the left to the ON position. A red
surface will be visible underneath the slide switch.
• The alarm is activated and the alarm clock icon (B – 12) is shown on the display (1).
• Move the ALARM ON/OFF slide switch (4) to the OFF position to the right until the
surface underneath the slide switch is black.
• The alarm is deactivated and the alarm clock icon (B – 12) disappears from the
display (1).
Stopping the alarm/snooze function
• If the alarm is activated, it is triggered at the set time and an alarm signal sounds
for one minute. The alarm automatically stops after this time and is then triggered
again the next day at the set alarm time.
8
button (5) or the button (6) and
button (3).
• To stop the alarm early, move the ALARM ON/OFF slide switch (4) to the OFF
position to the right until the surface underneath the slide switch is black. The alarm
is now deactivated.
• Move the ALARM ON/OFF slide switch (4) back to the ON position on the left
again to activate the alarm for the next day.
Note – Snooze function
• While the alarm signal is sounding, press the SNOOZE/LIGHT button (7) to
activate the snooze function. Zz begins to flash on the display (1). The alarm
signal will be stopped for 5 minutes, after which it will sound again.
• The snooze function can be activated four consecutive times.

5.5. Temperature display

• Press and hold the WAVE button (10) for approx. 2 seconds to switch the
temperature display (B – 6) between °C and °F.
• This is only possible if the OFF/US/UK/DE/JP slide switch (12) is set to the US, UK
or DE position.
• If the measured values are outside the measurement range, the temperature display
(B – 6) will show Lo (< -40 °C/-40 °F) or HI (> 70 °C/158 °F).
5.6. Backlight
• If you press the SNOOZE/LIGHT button (7), the display (1) will light up for approx.
5 seconds.
• The alarm clock is equipped with a twilight sensor (8) that automatically switches
on the backlight of the display (1) to a dimmed setting as soon as it gets dark.
• During the day or if there is enough light, the twilight sensor (8) automatically
switches off the dimmed backlight on the display (1).
• Move the ON/OFF slide switch (9) to the ON or OFF position to activate or
deactivate the twilight sensor (8).
9