Idiomas disponibles
Idiomas disponibles
3.- Once the network of all the matrices has been confi gured, you will have to link each matrix to a
confi guration panel from which you can control the inputs and outputs, fi lters, etc. Please note that a
fi rst confi guration panel is created when you start the software. With this panel selected, click on the
CONNECT button of the matrix to be linked. The indicator on this confi guration panel will change status
from grey to green indicating that the matrix is connected and the name of the panel will change to the
name confi gured on the matrix for easy identifi cation.
4.- To add other matrices, click on the
of the matrices already added and indicate how many matrices of each type you wish to add.
Finally, repeat the same steps as many times as there are matrices in the installation:
-
Select 1 confi guration panel by clicking on the tab at the top.
-
Search for active devices in DEVICE LIST
-
Select the matrix to be linked to the tab and click on CONNECT
5.- RECOMMENDED. To change the name of the matrices, select the tab of the matrix to be modifi ed,
go to the top menu SETTING > DEVICE SETTING and modify the DEVICE NAME value.
button to the right of the tabs identifying each confi guration panel
- 5 -
EN
