Idiomas disponibles
Idiomas disponibles
This equipment is designed to minimise the risk or provide protection against falling and the dangers resulting from falling
down.
Always remember that no item of PPE can provide full protection. Suggest combining other appropriate PPE (e.g. EAL for EN
355, SRL for EN 360, VLL for EN 353-1 and EN 353-2) to achieve a higher level of protection.
Figure 1 - Components of Harness
1. Shoulder Strap (May have two attachments for Rescue – EN 1497)
2. Chest Strap
3. Sub-pelvic Strap
4. Leg Strap
5. Back Support
6. Adjustment Element
7. Dorsal Attachment for Fall Arrest – EN 361
8. Connecting Buckle on the Waist Belt
9. Hip Attachment for Work Positioning – EN 358
10. Front Attachment for Work Positioning – EN 813
11. Sternal Attachment for Fall Arrest – EN 361 or Rescue – EN 1497
a: Labelling position
b: Letter "A" for Fall arrest attachment
c: Letter "A/2" for Fall arrest attachment (Must use two attachments same time)
NOTE:
If the harness dorsal attachment permanently attached an extension lanyard with a connector, that it can be taken off and be
a spare part of the whole equipment. When the connector function is abnormal before use, the manual locking connector can
be replaced.
