cecotec ENERGYSILENCE AERO 5290 NATURAL Manual De Instrucciones página 48

ENGLISH
with the holes in the canopy. Turn the canopy to lock it. Re-insert the screws and secure
them all with a screwdriver.
6. Once you have secured the mounting bracket to the connection cover, you can hang the
fan. Hold the fan firmly with both hands. Slide the downrod through the opening in the
mounting bracket and allow the ball to rest on the bracket. Rotate the hole in the hanging
ball until it aligns with the tab on the mounting bracket.
Tip: Have someone else hold the ladder securely and bring the fan closer to you once it is on
the ladder.
Blade assembly. Fig. 10
Time saver: Blade bolt washers can be installed on each blade prior to installation.
7. Align the holes in the blades with the screw holes in the motor. Once all blades are
attached, tighten all the screws. Before securing screws permanently, repeat with
remaining blade arms.
Note: Tighten the blade screws a second time.
LED-Lamp assembly. Fig. 11-12-13
Unscrew the screws. Attach the LED plate to the bottom of the fan by inserting the fixing
8.
screws into the holes. Then turn it until it is firmly in place. Then screw in the previous
fixing screw by aligning the hole in the screw and the hole in the bottom of the fan. Finally,
tighten the other two fixing screws to secure the LED plate. Fig. 11
NOTE: During the installation or when the LED lamp is removed, keep the insulation pads
intact. Over-tightening the screws may damage them.
9. Replace the lamp cover and lamp shade. Fig. 12
10. Align the decorative cover with the engine tread and tighten it clockwise. Fig. 13
4. OPERATION
Remote control. Fig. 14
Power button
1.
2. Speed control
Winter function
3.
4. Summer function
Natural Breeze
5.
6. Natural Breeze shut-off
Timer controls
7.
8. Light button
48
ENERGYSILENCE AERO 5290 NATURAL