Idiomas disponibles
Idiomas disponibles
EN
7.2 Cleaning the glass
The dirt on the glass changes from black to brown, yellow and stone grey because of the quality of the pellets
and the wood types. Wipe off dirt using a damp cloth. Do not use caustic cleaning agents or hard metal
brushes to clean dirt, otherwise the high temperature resistant glass may be scratched.
Example of dirty glass
Example of clean glass
7.3 Cleaning the tank
When the stove is not in use, you must remove all the pellets from the tank using a vacuum cleaner with a long
extension cord. If the fuel remains in the tank, it may humidify, agglomerate and be difficult to ignite at the
beginning of the next season.
If the vacuum cleaner tip does not match the grid of the tank cover, please remove the grid to facilitate
cleaning.
Agglomeration of poor-quality pellets
Recommendation of good wood pellets
Caution: disconnect the plug before cleaning.
7.4 Checking the seals
The sealing cords of the door and the glass should be checked at least once a year. Place a piece of paper
between the seal cord and the door, close it, pull on the paper, if you can't remove it, it is in good condition. If
the paper can be removed, it means that the sealing cord is damaged; have it replaced.
