Idiomas disponibles
Idiomas disponibles
EN
Clean the fume extraction fan
Check and clean the fume evacuation fan. According to the figure above:
1. First unscrew the fixed top cover using a 3 mm Allen wrench, remove the screen and remove the top cover.
2. Unscrew the screw that holds the side plate and pull it with both hands, then lift it.
3. Disconnect the wire from the extractor and unscrew the fixing screw using a 4 mm Allen wrench.
4. Then slowly remove the fan and remove the soot from the pipe or fan. When reinstalling, make sure that the
gasket is sealed and that there are no smoke leaks.
Cleaning of smoke pipes
After the heating season, manually remove the T outlet cover downwards, clean it, and reinstall it, ensuring
that the gasket is in good condition and in place.
Cover
Example of dirty cover
Example of clean cover
