Sanyo DS27930 Manual Del Propietário página 14

i _ Quick Tips
• Channels deleted from
scan memory can be
selected with the
number keys.
• Restoring deleted
channels, use the
on-screen menu to
manually add channels
or start CH. (Channel)
Search from the menu.
It may take a few
minutes to search thru
the available channels.
OR
• Press the RESET
key twice.
Need help ?
VisitourWebsiteat
www.sanyoctv.com
or Call1-800-877-5032
SCAN VELOCITY
ADDING OR DELETING CHANNELS
1. Press MENU
key.
2. Use the ,&iV keys to highlight
CH. Scan Memory.
3. Press the + key to highlight channel number entry area.
4.
5.
Enter the channel number you want to add or delete (example): (734. For cable channels
above 99, press and hold the 1 key until (71 appears. Then enter the other two numbers.
Press the + key to change the present setting.
Example: Added will change to Deleted. This
takes about three seconds. During that time, the
word "Added" or "Deleted" will become yellow.
Use the 0-9 or AV keys to choose other channels
to delete or add, or press the MENU key to exit.
ASPECT RATIO
CH, Scan Memory © 34 Deleted
Aspect Ratio
Scan Velocity
TV Speakers
Audio Output
Menu Language
J
Use this feature when digital equipment is connected to
the component input jacks. The 4:3 setting is for nornlal
viewing. The 16:9 setting changes the picture image to
wide-screen viewing with minimal portion of top and
bottom compressed.
1. Press MENU key.
2. Use the ,&iV keys to highlight Aspect Ratio.
3. Press the -/+ keys to select 4:3 or 16:9.
&_i_¢_ _'_ _aJ_g 16:9
Scan Velocity
TV Speakers
Audio Output
Menu Language
Press MENU key to exit
This unit features an electronic circuit that regulates the scan speed of the electron
beam creating sharp transitions between the light and dark portions of the picture.
The result is crisp edges and sharply-defined clarity.
1. Press MENU
key.
2. Use the &iV keys to highlight Scan Velocity.
3. Press the -/+ keys to select Off, Low, or High.
_ _._lu_y OFF _ Low
TV Speakers
Audio Output
Menu
Language
Press MENU key to exit
i
TV SPEAKERS nr__:_;,_;_ _';0_] OFF
1. Press MENU key. Audio Output
Menu Language
2. Use the ,&'_' keys to highlight TV Speakers.
Press MENU key to exit
3. Press the -/+ keys to turn the speakers ON or OFF.
Note: Sound will not be produced through your TV speakers if the OFF mode is selected.
AUDIO OUTPUT
This convenient menu option enables you to select a fixed or variable audio signal.
1. Press MENU key.
2. Use the ,&i'_' keys to highlight Audio Output.
3. Press the -/+ keys to select Fixed or Variable.
Fixed Mode (Constant audio output level from TV)
Use external equipment's volume control to adjust sound level.
Variable Mode (Output from TV varies with volume)
Use the TV and external equipment's volume controls to adjust the sound level.
TV Speakers
&_©_ Fixed _\V_)A_
Menu Language
Press MENU key to exit