Idiomas disponibles
Idiomas disponibles
•
Always use original accessories and spare parts.
Accessories and spare parts that are not approved
by the manufacturer, can cause serious injury or
death.
•
Replace damaged, worn or broken parts.
•
Only do the maintenance as given in this operator's
manual. Let an approved service center do all other
servicing.
Introduction
WARNING:
safety chapter before you use the product.
To do before you operate the product
•
Read the operator's manual carefully and make sure
that you understand the instructions.
•
Read the engine manual that is supplied by the
engine manufacturer.
•
Do the daily maintenance. Refer to
schedule on page 12 .
•
Install the handle with the supplied bolts. (LFV 60
only)
To start the product
1. Open the fuel valve. Refer to
50 on page 2 or Product overview LFV 60 on page 3
for information about where the fuel valve is on your
product.
1107 - 008 - 02.05.2024
Operation
Read and understand the
Maintenance
Product overview LF
•
Remove all tools from the product before you start
the engine after maintenance. Loose tools or tools
attached to rotating parts can eject and cause injury.
•
After maintenance, do a check of the vibration level
in the product. If it is not correct, speak to an
approved service center.
•
Let an approved service center do servicing on the
product regularly.
2. Set the throttle control to ⅓ throttle. Refer to
overview LF 50 on page 2 or Product overview LFV
60 on page 3 for information about where the throttle
control is on your product.
Product
9
