Idiomas disponibles
Idiomas disponibles
ENGLISH
To assemble this ceiling fan, follow the steps below:
1. Remove the lower and upper pins from the downrod and release the hanging ball at the
top of the rod. Fig. 6
2. Pass the wiring from the main body through the downrod.
3. Attach the downrod to the main body by inserting the pin through the downrod and the
main-body attachment. Tighten the screws provided on the main-body attachment to
properly secure the downrod.
4. Remove the 4 screws that fix the upper canopy and the installation bracket. Insert the
upper canopy through the downrod.
5. Insert the pin through the pin holes located on the upper end of the downrod. Once
inserted, slide the hanging ball upward to the upper end of the downrod and fix it with
one of the screws provided.
6. Make sure the pin fits in the slots located inside the hanging ball before screwing it. Fig. 7
7. Mark the centre of the installation bracket and use both self-tapping screws provided
with their corresponding washers and pressure washers to fix the installation bracket to
a wooden ceiling.
Warning: self-tapping screws are only suitable for wooden ceilings. In case of installing
the ceiling fan to concrete ceilings or joists, use a drill for making the holes and plugs or
expansion screws (not included).
8. Once the installation bracket is screwed, connect the wiring. First connect the quick-
connect cable to the terminal block on the installation bracket. Following the colour
code (Fig. 8). From the opposite end of the terminal block, connect the wiring from the
installation of your home.
Fig. 8 key:
1. Black and Blue
2. White
3. Earth
4. Phase (Brown/Black)
5. Neutral (Blue)
6. Earth
9. Lift the fan previously mounted to the installation bracket and insert the hanging ball
through the installation-bracket hole. Fig. 9.
10. Insert the remote control receiver between the ceiling bracket and the bar as shown in
the picture. Fig. 10.
11. Connect the cables that come out from the downrod to those from the installation
bracket using both quick connectors. Fig. 11
48
ENERGYSILENCE AERO 3050
