Beko GNE753DX Manual Del Usuario página 13

Idiomas disponibles

Idiomas disponibles

Installation
4.4 Electrical connection
A
WARNING:
multi sockets in power connection.
B
WARNING:
must be replaced by Authorized
Service.
Our firm will not assume responsibility for any
damages due to usage without earthing and
power connection in compliance with national
regulations.
The power cable plug must be easily
accessible after installation.
Hot surface warning!
The side walls of your product are
equipped with cooler pipes to enhance
C
the cooling system. High pressure fluid
may flow through these surfaces, and
cause hot surfaces on the side walls.
This is normal and it does not require
servicing. Be careful when you contact
these areas.
Refrigerator / User Guide
Do not use extension or
Damaged power cable
4.5 Water connection
(Optional)
A
WARNING:
the water pump (if available) during
connection.
The product's water mains, filter and carboy
connections must be rendered by authorizer
service. The product can be connected to a carboy
or directly to the water mains, depending on the
model. To establish the connection, the water hose
must first be connected to the product.
Check to see the following parts are supplied with
your product's model:
1
3
1. Connector (1 piece): Used to attach the water
hose to the rear of the product.
2. Hose clip (3 pieces): Used to fix the water
hose on the wall.
3. Water hose (1 piece, 5 meter diameter 1/4
inches): Used for the water connection.
4. Faucet adapter (1 piece): Comprises a porous
filter, used for connection to the cold water
mains.
5. Water filter (1 piece *Optional): Used to
connect the mains water to the product. Water
filter is not required if carboy connection is
available.
13 / 36 EN
Unplug the product and
2
4
*5
loading

Este manual también es adecuado para:

Gne753dw