WAGNER PROSPRAY 3.21 Instrucciones De Uso página 9

PS 3.21
2
GENERAL VIEW OF APPLICATION
2.1
APPLICATION
Materials
Release agents, oils, undercoats, primers, fillers,
synthetic resin-based paints, acrylic paints
recommended nozzle size: FineFinish 0.008" - 0.014"
Emulsion paints, latex paints
recommended nozzle size: 0.017" - 0.027"
Anti-corrosive agents, flame retardants, fabric
adhesive
recommended nozzle size: 0.021" - 0.031"
Airless-scrapers
recommended nozzle size: 0.027" - 0.039"
2.2
COATING MATERIALS
PROCESSIBLE COATING MATERIALS
Pay attention to the Airless quality of the coating
i
materials to be processed.
Dilutable lacquers and paints or those containing solvents, two-
component coating materials, dispersions, latex paints, release
agents, oils, undercoats, primers, and fillers.
No other materials should be used for spraying without
Wagner's approval.
FILTERING
Despite suction filter and insertion filter in the spray gun,
filtering of the coating material is generally advisable.
Stir coating material before commencement of work.
Attention: Make sure, when stirring up with
i
motor-driven agitators that no air bubbles are
stirred in. Air bubbles disturb when spraying and
can, in fact, lead to interruption of operation.
= Recommended
Object Size
up to 200 m
2
200 m - 800 m
2 2
more than 800 m
2
up to 200 m
2
200 m - 800 m
2 2
more than 800 m
2
up to 200 m
2
200 m - 800 m
2 2
more than 800 m
2
up to 200 m
2
200 m - 800 m
2 2
more than 800 m
2
VISCOSITY
With this unit it is possible to process highly viscous coating
materials of up to around 20.000 MPa·s.
If highly viscous coating materials cannot be taken in by suction,
they must be diluted in accordance with the manufacturer's
instructions.
TWO-COMPONENT COATING MATERIAL
The appropriate processing time must be adhered to exactly.
Within this time rinse through and clean the unit meticulously
with the appropriate cleaning materials.
COATING MATERIALS WITH SHARP-EDGED ADDITIONAL
MATERIALS
These have a strong wear and tear effect on valves, high-
pressure hose, spray gun and tip. The durability of these parts
cane be reduced appreciably through this.
GENERAL VIEW OF APPLICATION
= Not-recommended
Model
9