Idiomas disponibles
Idiomas disponibles
Use the Vacuuming & Mopping Function
1. First dampen the mop pad and wring out excess water.
Next, install and attach the mop pad onto the mop pad holder in place.
Lastly, install the mop assembly onto the bottom of the robot vacuum.
2. Open the cover of the robot vacuum and take the water tank out. Fill the water
tank with tap water and then reinstall the tank.
CAUTIONS:
· Do not add hot water to the water tank, as this may cause the tank to become deformed.
· To avoid clogging, do not add any cleaning agents or disinfectants to the water tank.
9
3. Press the button
on the robot vacuum or use the app to make the robot
vacuum perform the vacuuming and mopping task.
4. When the robot vacuum finishes a task and returns to the charging dock, remove
the mop assembly and wash the mop pads in time.
Notes:
·
If the robot vacuum will not be used for an extended period, remove the water tank and empty it to prevent odor and
mildew.
·
The robot vacuum can recognize carpets thicker than 5 mm. If there are carpets with a thickness of less than 5 mm
in the area to be cleaned, it is recommended to remove the mop pads or set restricted areas before cleaning.
·
If the floor of the cleaning area is made of special materials, such as cobblestones, the robot vacuum may recognize
it as carpets and avoid it. It is recommended to disable the carpet recognition function in the Mi Home/Xiaomi
Home app before cleaning the area.
