Idiomas disponibles
Idiomas disponibles
English
WARNING: The Versatrack™ integral hang hook is not a
belt hook.
WARNING: Ensure that the tool weight does not exceed
the maximum rated weight of 20 lb (9 kg) for the selected
VersaTrack™ hook.
WARNING: When hanging objects on a VersaTrack™
Trackwall rail, adequately space the tools in order to not
exceed 75 lb (35 kg) per linear foot.
iMPORTAnT: When attaching the VersaTrack™ hang
hook, use only the screw that is provided. Be sure to
securely tighten the screw. VersaTrack™ accessories
mount compatible tools securely to the VersaTrack™
Trackwall system.
1. Turn the tool off, remove the battery pack
and accessories.
CAUTION: Any product with exposed cutting
teeth must have them covered securely if it is to be on
the VersaTrack™ Trackwall.
2. Attach the VersaTrack™ hang hook
a. Place the VersaTrack™ hang hook onto the accessory
attachment location
28
b. Use a screwdriver to secure the VersaTrack™ hang hook
with the provided screw
for this.
nOTE: VersaTrack™ accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact CRAFTSMAN, call 1‑888‑331‑4569.
Belt Hook (Fig. A, Q)
Optional accessory, sold separately.
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack before
making any adjustments or removing/installing
attachments or accessories.
WARNING: To reduce the risk of serious personal
injury, DO NOT suspend tool overhead or suspend
objects from the belt hook. ONLY hang tool's belt hook
from a work belt.
WARNING: To reduce the risk of serious personal
injury, ensure the screw holding the belt hook is secure.
CAUTION: To reduce the risk of personal injury or
damage, DO NOT use the belt hook to hang the tool.
iMPORTAnT: When attaching or replacing the belt hook
use only the screw
that is provided. Be sure to securely
23
tighten screw.
If the belt hook is not desired at all, it can be removed from
the tool.
1. Place the belt hook onto the accessory attachment
location
at the base of the tool.
28
2. Use a screwdriver to secure the belt hook with the
provided screw. Do not use any other screw for this.
To remove the belt hook, remove the screw that holds the
belt hook in place.
nOTE: When using the belt hook, keep hands away from
the trigger switch
2
.
10
3
24
on the tool.
at the base of the tool.
23
. Do not use any other screw
Cleaning
WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk of eye
injury, always wear ANSI Z87.1 approved eye protection when
performing this procedure.
WARNING: Never use solvents or other harsh chemicals
for cleaning the non‑metallic parts of the tool. These chemicals
may weaken the plastic materials used in these parts. Use a
cloth dampened only with water and mild soap. Never let any
liquid get inside the tool; never immerse any part of the tool
into a liquid.
Repairs
The charger and batteries are not serviceable. There are no
serviceable parts inside the charger or battery pack.
WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement, when applicable) should be
performed by a factory service center or an authorized service
center. Always use identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
• WARRAnTY sERViCE: Registering your product will help
you obtain more efficient warranty service in case there is a
problem with your product.
• COnFiRMATiOn OF OWnERshiP: In case of an
insurance loss, such as fire, flood or theft, your registration of
ownership will serve as your proof of purchase.
• FOR YOUR sAFETY: Registering your product will allow
us to contact you in the unlikely event a safety notification is
required under the Federal Consumer Safety Act.
Register online at www.craftsman.com/account/login.
Three‑Year Limited Warranty
For warranty terms, go to www.craftsman.com/pages/
warranty.
To request a written copy of the warranty terms, contact:
Customer Service at CRAFTSMAN, 701 East Joppa Road,
Towson, MD 21286 or call 1‑888‑331‑4569.
lATin AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country‑specific warranty information contained in
the packaging, call the local company, or see website for
warranty information.
29
,
FREE WARning lABEl REPlACEMEnT: If your warning
labels become illegible or are missing, call 1‑888‑331‑4569
for a free replacement.
