camry Premium CR 4086 Manual De Uso página 4

used because that may cause fire, electrical shock or injury.
16. Do not use the appliance for other than its intended use. The blades are very sharp!
Care is needed when handling them
17. Never blend hot oil or fat.
18. Keep fingers away from moving parts.
19. Do not cover vents.
20. Do not use with wet hands.
21. Never blend bones, ice, coffee or peanuts.
22. When changing accessories, be sure that device is NOT connected to electricity.
23. Short-time operating: Use the appliance for no longer than 2 minutes and leave it
cooled down completely before using again about 4 minutes.
24. Before first use, clean the device.
25. When cleaning device, do not use aggressive detergent, it may damage the cover of
the device.
DEVICE DESCRIPTION:
1.1. Power button
1.4 Measurement cup (50ml)
2.1 Bottle lid
3.1 Cooling attachment
4. Citrus juicer attachment
5.1. Grinder cup
USING THE DEVICE
BLENDER
1. Ensure that all blender elements are clean.
2. Attach the cutting blades (1.3) to the jar (1.6) by screwing them at the bottom of the jar.
3. Place the jar (1.6) with the attached cutting blades (1.3) on the motor base (1.2).
4. Place the ingredients in the jar (1.6). All the ingredients must be filled below max level marked on the jar (1.6).
5. Connect the power cord to a power socket.
6. To turn on the blender, turn the jar (1.6) to the right on the motor base (1.2). Check if it fits properly. Place the lid appropriately (1.5) at
the top.
7. Press and hold the power button (1.1) to blend. Do not use the blender for longer than 2 minutes of continuous operation time.
NOTE: The device is intended for soft fruits. Before blending, first cut the fruits into pieces. Don't use hard fruits.
NOTE: The quantity of ice cubes in the jar (1.6) should be about 10 pieces, and size of the ice cube should not exceed 30*23*23mm.
The ice cubes not larger than 15 x 15 mm are the best for blending. When crushing ice, press and release the power button (1.1) 5
times. Then press for longer time. Don't crush ice when the jar (1.6) has no water inside.
8. Remove the power cord from the power socket.
9. Remove the jar (1.6) from the motor base (1.2).
SPORT BOTTLE
1. Place the ingredients in the bottle (2.2). All the ingredients must be filled below max level marked on the bottle.
2. Attach the cutting blades (1.3) to the bottle (2.2) by screwing them onto the bottle top.
3. Place the bottle (2.2) with the attached cutting blades (1.3) on the motor base (1.2). Check if it fits properly.
4. Connect the power cord to a power socket.
5. Press and hold the power button (1.1) to blend. Do not use the blender for longer than 2 minutes of continuous operation time.
6. Remove the power cord from the power socket.
7. Remove the bottle (2.2) from the motor base (1.2). Unscrew the cutting blades (1.3) and put the bottle lid on (3.1).
COOLING ATTACHMENT
1. Fill the cooling attachment (3.1) with water up to the maximum level indicator.
2. Keep the cooling attachment (3.1) in the freezer until the water freezes.
3. Once the water in the cooling attachment (3.1) freezes place it into the bottle (2.2) and
put the bottle lid on (2.1).
1.2. Motor base
1.5 Lid
2.2 Bottle
3.2 Cooling attachment cover
5.2 Grinder blades
1.3.Cutting blades
1.6. Jar
4