Idiomas disponibles
Idiomas disponibles
■ The device must be switched off when
the mains adapter is pulled out or
inserted into the plug socket. Always
pull the mains adapter and never the
mains cable to disconnect the device
from the mains power.
■ Do not use the device when it is still
connected to the mains adapter.
■ Protect the device from: heat, naked
fl ames, sub-zero temperatures, direct
sunlight and impacts.
■ Never place objects on the device or
the connecting cable.
■ Use only original accessories from the
manufacturer in order to guarantee
that there is no interference that may
prevent the device from working and to
avoid possible damage.
NOTICE – RISK OF DAMAGE TO
MATERIAL AND PROPERTY FROM
BATTERIES
■ Remove the battery from the handle
when it is used up. This will prevent
any damage caused by leaks.
■ Use only the battery type specifi ed in
the technical data. Pay attention to the
correct polarity (+ / –) when replacing
batteries.
■ Non-rechargeable batteries must not
be recharged or reactivated by other
means, dismantled, thrown into a fi re,
immersed in fl uids, or short-circuited.
ASSEMBLING THE DEVICE
PLEASE NOTE: Fold the stem mount (5)
on the main unit (A) upwards. It must be
upright so that the device is deactivated
and cannot be switched on accidentally.
1. Plug the tube parts (2 – 4) into each
other as follows: tube > connecting
piece > tube. Each part must be heard
to engage in the other.
14
2. Plug the handle (C) onto an aluminium
tube at the top. It must engage audibly.
3. Plug the stem with the handle into the
stem mount on the main unit. It must
engage audibly.
To detach the stem, the handle or the
individual tube parts, in each case press
the corresponding release buttons and pull
out the respective part.
ATTACHING / DETACHING MOP
PADS
Please Note!
■ The mop pads must not be attached to
the cleaning feet when they are wet.
○ Attaching: Attach one mop pad (F) in
each case to a cleaning foot (8) using
the hook and loop fastener.
○ Detaching: Pull the mop pads off the
cleaning feet (Picture C).
CHARGING UP THE
BATTERY
Please Note!
■ Risk of a short circuit! Do not stick any
conducting objects (e.g. a screwdriver
or similar implement) into the charging
socket.
■ Only connect the mains adapter to a
plug socket that is properly installed
and matches the technical data of the
device. The plug socket must also be
readily accessible after connection so
that the connection to the mains can
quickly be isolated.
■ Pull the mains adapter out of the plug
socket if it is not going to be used for a
lengthy period of time.
■ It is essential that you charge up the
battery fully before you fi rst use the
