Bosch GCT30-42 Instrucciones De Funcionamiento Y Seguridad página 14

Auto Starting/Stopping the Dust Extractor
When paired with the GCA30-42 receiver:
— Once the plug of the dust extractor has been inserted
into the primary power source, the switch of the dust
extractor has been set to Power Tool Activation Mode,
the plug of the receiver GCA30-42 has been inserted
into the plug socket of the dust extractor and both the
Auto-Start Remote 1 and receiver GCA30-42 have
been successfully paired, your auto start system is
ready to be used.
— Ensure that the Auto-Start Remote 1 is flush and snug
against the mounting surface of the cordless tool by
adjusting the position on the supplied attachment
band 6.
— Insert the extraction hose into the dust extractor at-
tachment of the cordless tool.
— Once the cordless power tool is turned on/off, a start/
stop signal is sent from the Auto-Start Remote 1 to
the receiver GCA30-42 and the corresponding dust
extractor is turned on/off.
When paired with the cordless dust extractor with Auto-
Start mode:
— Ensure that the cordless dust extractor has been set
to the Auto-Start mode and the Auto-Start Remote 1
has been successfully paired with the cordless dust
extractor.
14
160992A8R4 GCT30-42 202310.indd 14 10/5/23 4:26 PM