Idiomas disponibles
Idiomas disponibles
Press the
and
LED disappear).
TO STOP AND RESET THE ALARM TO COME ON THE NEXT DAY
When alarm 1 or 2 is sounding, the related alarm icon flashes. Press the
button once to stop the alarm and reset it to come on the following day.
After that both
TO ACTIVATE THE SNOOZE FUNCTION (default snooze duration is 5
minutes)
When alarm is sounding, press the
silenced momentarily and come on again after the set snooze duration.
Note: if your second alarm activates while the first alarm is sounding or it is
in the snooze mode, the second alarm overrides the first alarm (the first
alarm is reset to come on the next day).
TO USE THE DIMMER FUNCTION
At normal time display mode, press the
brightness (HI / LO / OFF) of the time display.
TROUBLE SHOOTING
If your clock displays irrelevant time or does not function properly, which
maybe caused by electro-static discharge or other interference. Unplug the
DC jack at the back of the unit, slide open the battery cover and take out the
batteries. Then re-plug the DC jack and reinstall batteries by observing the
correct +/- polarity. Your unit will be reset to default settings and you need
to set it again.
CARE OF YOUR PRODUCT
Place your clock on a stable surface, away from sources of direct
sunlight or excessive heat or moisture.
Protect your furniture when placing your clock on a natural wood,
lacquered finish or natural stone material by using a cloth or protective
material between it and the furniture.
Clean your clock with a soft cloth moistened only with mild soap and
water. Stronger agents such as Benzine, thinner or similar materials
button again to deactivate both alarms (both
LED and/or
LED remain on the display.
button once, the alarm will be
button once to adjust the
EN8
LED
