Idiomas disponibles
Idiomas disponibles
TO POWER UP YOUR CLOCK
Plug in the AC/DC adaptor (DC 5V / 2.0A) to an AC household outlet, and
then plug the DC jack to the back of the unit. The display shows the default
time (at high-dim brightness).
Press the
need.
Remark: Make sure the correct adaptor (DC 5V / 2.0A) is being connected.
Incorrect chargers or adaptors may cause damage, the wireless charger
may malfunction or may not charge your phone.
TO INSTALL BACKUP BATTERY ON YOUR CLOCK
Your clock requires one lithium cell "CR2032" battery (not included) to
provide backup power to it in the event of a temporary power interruption.
Place your clock face down on a flat and soft surface.
Use a coin to turn the battery cover anti-clockwise at the back of your
unit.
Insert one new lithium cell "CR2032" battery into the battery
compartment by observing the "+" polarity facing upward.
Replace the battery cover and turn clockwise to lock it.
If AC power is interrupted and backup batteries are being used, the time
and all settings of your unit will be kept. The alarm, wireless charging and
USB charging do not function and the time display does not light up.
TO USE THE WIRELESS CHARGER
This function only works with mobile devices that support Qi – compatible
wireless charging technology.
Make sure your clock is connected with the adaptor (DC 5V / 2.0A)
supplied with this clock. Unauthorized chargers or adaptors may cause
damage or the wireless charger may malfunction.
Center your mobile device with back side down on the marked
charging target circle. The wireless charging indicator is on.
If your mobile device is not charging, the charging indicator is off.
Please verify that your mobile device is not shifted too far off center.
Using the external wireless charging receiver connected to non-Qi
compatible mobile device may result in unstable charging.
button once to turn the time display to low brightness if
EN3
