Idiomas disponibles
Idiomas disponibles
-
Lampshade
-
Remote control receiver
-
Anti-sway kit
-
Installation kit
-
LED light
-
Remote control
3. ASSEMBLY
NOTE: assistance should be provided by another person to install the fan safely.
Unpack the ceiling fan carefully, remove all parts and components and place it on a cloth or
soft surface to prevent damage. Do not lay the motor housing on its sides to avoid damage to
the housing. Before starting the installation, check that no parts are missing.
Warning: to avoid electric shock, all electrical operations should only be carried out after
disconnecting the power by removing the fuses or turning off the circuit breaker.
WARNING
To avoid personal injury and damage, make sure that the place to hang the blades leaves a
clearance of 2.3 metres from the floor and 76 centimetres from any wall or obstacle. Ensure
that the hanging bracket is securely fastened to the building structure and can support the full
weight of the fan. Do not attach the mounting bracket directly to ceilings with a thickness of
less than 10 mm to avoid the risk of the screw loosening, i.e. make sure that the ceiling joists
are strong enough and of the right size to support a weight of about 35 kg. In addition, make
sure that when drilling the holes, there are no gas pipes, vents, gas, or other wiring that could
cause damage.
1. Mark the correct position where you want to install your fan.
2. Adjust, mark and drill holes in the mounting bracket Fig. 1. Fix the mounting bracket, as
shown in Fig. 14. In the case of a wooden ceiling, carry out as in Fig. 16 and in the case of a
concrete ceiling, carry out as in Fig. 17
3. Before proceeding with the installation of the fan, check the correct installation of the
mounting bracket and make sure that it will support the weight of the fan.
4. Now once mounted, make sure that the electricity is completely disconnected.
5. Connect the house wiring to the power socket.
6. Make the neutral input wiring connections (blue wire).
7. Connect the earth input wiring (yellow and green).
8. Make the line input wiring connections (black or brown).
9. Connect the receiver wire to the terminal block according to the shape of the connector.
10. Choose the downrod length according to your needs.
ENERGYSILENCE AERO 7000 LIGHT PRO
ENGLISH
45
