GreenWorks MO60L518 Manual Del Operador página 11

Idiomas disponibles

Idiomas disponibles

EN
4.10
ACTIVATE TURBO BOOST (TEMPORARILY
INCREASED CUTTING SPEED)
1.
Press the turbo button to increase the speed up
to 3200 RPM.
2.
Release the turbo button to operate at the default
cutting speed.
Note: When using the turbo boost button,
the battery will drain faster. Therefore, it is
recommended to use the turbo boost button only
when necessary.
4.11
LED HEADLIGHTS
1.
The LED headlights will turn on when the device
is switched on and will switch off when the device
is switched off.
4.12
STOP THE PRODUCT
1.
Release the blade activation lever(s) to stop the
product.
2.
Open the battery door.
3.
Press the battery release button to remove the
battery.
WAIT UNTIL THE BLADE HAS COMPLETELY
STOPPED BEFORE RESTARTING THE
PRODUCT. DO NOT QUICKLY TURN THE
PRODUCT OFF AND ON.
TURBO
TURBO
WARNING
English
ALWAYS TAKE OUT BATTERY AFTER FINISHING
THE TASK.
4.13
RECOMMENDATIONS FOR EFFECTIVE
LAWN MOWING
• Always use a sharp blade when mowing, as a dull
blade can result in an uneven cut and cause the
grass to turn yellow. Additionally, a sharp blade uses
less energy than a dull one.
• Limit the amount of grass you cut to no more than
one-third of its height. Start with a high cutting
height and adjust it lower as needed after examining
the results. If the grass is very long, mow slowly and
consider making 2 passes if necessary.
• Vary the cutting direction each time you mow to
prevent creating visible lines or stripes in the lawn.
• Keep the rear cover of the mower clean.
Accumulation of grass and dirt on the inner side of
the cutting cover can reduce the effectiveness of the
cut.
12
WARNING
loading