Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5.6
Regulating the air flow
•
With the device switched on, press the
speed control
times in succession to switch between
the 3 speed settings:
Speed
Display 17
1
2
3
Evaporation volume: 70 ml/h
An acoustic signal sounds each time the
button is pressed.
•
Figure C: you can influence the direc-
tion of the air flow by tilting the front
protective grid 3 on the handle 1 up-
wards or downwards.
5.7
Swivel function
Figure D: the device has a swivel function.
It causes the device to swivel back and forth,
thus distributing the flowing air more evenly
in the room.
•
With the device switched on, switch on
the swivel function by pressing the
Swing 20 button. An acoustic sig-
nal sounds. The fan starts to swivel
back and forth.
•
Switch the swivel function off by press-
ing the
Swing 20 button again. An
acoustic signal sounds.
5.8
Misting function
With the misting function, water from the
water tank 13 is finely misted and directed
through the mist outlet 2. In this way, the air
in the air flow is humidified.
Speed 19 several
Speed
low
medium
high
NOTE: always make sure to clean the water
tank 13 after 3 days at the latest and al-
ways use fresh tap water. If there is a bad or
musty smell, be sure to clean the water tank.
•
With the device switched on, press the
Mist 21 button to switch on the
function. An acoustic signal sounds.
•
Press the
Mist 21 button to switch
the function off again. An acoustic sig-
nal sounds.
•
The LED 4 flashes red and/or acoustic
signals sound if there is no water in the
water tank 13 or the water tank has
been removed. Fill up the water and
push the water tank into the device.
Press the
Mist 21 button again to
restart the function.
5.9
Switching on the light
and selecting the colour
1. Switching on: press the light and colour
selector switch
switch on the mood light in colour
change mode. You will see smooth
transitions of all available colours until
it is switched off.
2. By pressing the light and colour selec-
tor switch
Light 22 again, while
the colour change mode is active, you
can select one of seven colours (press
the light and colour selector switch
Light 22 again for each colour).
This is then permanently displayed.
If no colour appears after pressing the
light and colour selector switch
Light 22, the light/colour display
is switched off again.
3. Press the light and colour selector
switch
Light 22 again to switch the
mood light back on in colour change
mode.
An acoustic signal sounds each time the but-
ton is pressed.
Light 22 once to
25
GB
Tabla de contenido
