PROMEBA PS-251 Manual De Instrucciones página 82

USER GUIDE
CHAIR PS-251 + PA-260
06 OPERATION
pressing the release buttons. When the locks are engaged, the handles will not move.
RETRACT THE HANDLES:
1. Press the release button (Figure 6) and push the handle until you find the blocking position.
2. Release the button and slide the handle backwards until it clicks into place.
3. Lock both handles in the same position. Verify that both handles are locked when you try
to push or remove them without pressing the release buttons. When the locks are
engaged, the handles will not move.
FOOTREST
The footrest has two positions:
1. Lifting for storage (See in Figure 7).
2. Lowered for use (See in Figure 8).
- To lower the footrest, lower it down until
it stops.
- To lift the footrest, lift it until it stops.
Instructions for footrest use:
 Use the footrest correctly to ensure that
it does not interfere with the patient's operator feet.
 Before transferring the patient to the chair, make sure that the footrest is raised in the
storage position. Sit down the patient before lowering the footrest.
 At the time to move the patient from the chair, lift the footrest to the storage position before
loosening the belts. This will prevent the patient from trying to stop before the footrest has
been stowed out of the way of his feet.
 Keep the repository elevated when it is not in use.
FRONT SWIVEL WHEELS BRAKE
The front wheels of the chair are equipped with brakes to
prevent the chair from moving during the transfer of the
patient or during a stop.
- Be with the chair and keep control of it at all times. Do
not use wheel locks as a substitute for operator control.
- To activate a wheel lock, press down the rear end of the
lock pedal. (See in Figure 9).
- To deactivate a wheel lock, press down the front end of
the lock pedal. (See in Figure 9)
EN
REV. 2023/11
82