PROMEBA PS-251 Manual De Instrucciones página 81

USER GUIDE
CHAIR PS-251 + PA-260
06 OPERATION
06.3. Functioning
ARMRESTS
The armrest has two positions:
1. Lifting for storage (See in Figure 2).
2. Lowered for use (See in Figure 1).
- To lower the armrest, push it down
until it stops.
- To lift the armrest, lift it until it stops.
Instructions for using the armrest:
 Keep the armrest raised when it is
not in use.
 Keep the armrest clean, avoiding patient contact with external fluids.
BELTS
Use patient restraint systems to help the patient in the chair.
Follow these instructions to properly anchor the belts:
1. Join the two buckles indicated in Figure 3, following the direction of the arrows until the
system will be closed and then be sure that it does not open.
Instructions for use of the belts:
 Make sure that they are well secured in
their respective anchor points, which
can be observed in Figure 4.
 Use a minimum of two belts.
 A safety belt should be secured on the
seat of the chair to keep the patient on
the chair.
TELESCOPIC HANDLES
The telescopic handles adjust to two locked positions. Adjust the handles according to the
preferences of the operator and the task.
EXTEND THE HANDLES:
1. Press the release button (Figure 5) and
pull the handle until you find the locking
position.
2. Release the button and slide the handle
forward until it clicks into place.
3. Lock both handles in the same position.
Verify that both handles are locked when
you try to push or remove them without
EN
REV. 2023/11
81