PROMEBA PS-251 Manual De Instrucciones página 77

USER GUIDE
CHAIR PS-251 + PA-260
06 OPERATION
06.1. Transport and storage
Before transporting the appliance, make sure that it is
correctly packaged. During transport always fix the load.
If piling up is necessary, always follow the scheme
shown on figure 1. Transport the load levelled and
following all precepts
transportation, ensuring also that there are no risks of
shocks, bumps or falls during the transport itself.
To unpack the device place the box on a flat, stable
surface and carefully open the seal. Remove the device
from the inside of the box following the scheme shown
on figure 2.
Keep the original packaging for use in case of any other
transport and for storage.
Damage to the appliance caused during transport and
handling is not covered by the guarantee. Repairs or
replacement of the damaged parts are the responsibility
of the client.
The device must be stored in a dry, cool area away from
direct sunlight. It must not be placed in contact with any
substances or chemical agent which could cause
damage and reduce safety characteristics.
The storage temperature must be between -20ºC and 60ºC.
La temperatura de almacenamiento debe de estar entre -20ºC hasta 60ºC.
Packaging characteristics:
SIZE: 1160 x 550 x 305 mm
WEIGHT: 35 Kg.
The product must not be manipulated in any way (modification, adjustment, addition,
substitution). In such cases, all responsibility for any malfunction or injury caused by the
product itself will be disclaimed; furthermore, CE certification and product warranty will be
considered void.
06.2. Preparation
When the product is received:
Verify that the packaging is intact and has no signs of impacts, falls and isn't wet.
-
- Remove the packaging and expose the material so that all components are visible.
- Check that all the components/pieces on the section 5 are present.
The appliance must be checked before every use so as to reveal any working abnormalities
and/or damage caused by transport and/or storage. In particular, check:
REV. 2023/11
and rules for the
EN
load
77