Idiomas disponibles
Idiomas disponibles
545150014
2. Install the 4 side-face glass windows (2) carefully on the edge protectors (3) using 8 M5X20 screws
(13).
3. Install the 4 big edge protectors on the top corner between each glass window using 8 M5x20
screws.
GAS REQUIREMENTS
Use propane only.
•
Maximum inlet pressure of propane regulator must not exceed 100 PSI.
•
The pressure regulator and hose assembly used must conform to local standard codes.
•
The installation must conform to local codes, or in the absence of codes, with standard codes.
•
The installation must conform to local codes, or in the absence of codes, with the standard for
•
storage and handling of propane gases.
A dented, rusted or damaged propane tank may be hazardous and should be checked by your
•
tank supplier.
Never use a propane tank with a damaged valve connection.
•
The propane tank must be arranged to provide for vapor withdrawal from the operating
•
cylinder. Never connect an unregulated propane tank to the heater
The pressure adjuster should comply with the standard EN16129 and current regulations in
•
the country where it is installed, which may be found at your nearest retailer of gas items.
It is strictly prohibited to use adjustable pressure.
•
EN
6
