Idiomas disponibles
Idiomas disponibles
Initial installation process
The initial installation process starts when first using the device
or possibly if there has been a long interruption to the power
supply. The date and time entered are saved with each recording
as the recording time.
Set the language
When using the recorder for the first time, you will be prompted
to set the language.
1
Press + / – to select your language.
2
Press F2 (OK) to confirm.
Set the date and time
After selecting the language, the recorder will prompt you to set
the current date and time.
1
Press + / – -to change the value for the year, month or day.
2
Press F3 (Next) to advance to the next entry.
3
After setting the day, press F3 (Next) to advance the set-
tings to the correct time.
4
Press + / – to select a 12-hour or 24-hour clock, and to
change the value of the hour and minute settings and AM or
PM (if a 12-hour clock is selected).
5
Press F2 (OK) to confirm the date and time.
X The recorder is now ready to function.
Tip
• You can change the language, date and time at any time
using the settings menu ( Settings, p. 24).
Power-save mode
By default, the recorder will enter power-save mode after 5
minutes of inactivity. Lift up the recorder or press any button to
reactivate it.
Tip
• You can change the length of time before the recorder will
enter into power-save mode. Power save, p. 27.
13
EN
