Safety Notes; Installation Instructions; Technical Data; Symbol Description - Hansgrohe Raindance Select S 240 2jet 26466 Serie Modo De Empleo/Instrucciones De Montaje

Safety Notes

Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
Children as well as adults with physical, mental and/
or sensoric impairments must not use this product
without proper supervision. Persons under the
influence of alcohol or drugs are prohibited from
using this product.
Do not allow the streams of the shower touch
sensitive body parts (such as your eyes). An
adequate distance must be kept between the shower
and you.
The arm of the shower head is intended only to hold
the shower head. Do not load it down with other
objects!

Installation Instructions

• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
• During installation of the product by qualified trained
personnel, make sure that the entire fastening surface
is even and smooth (no protruding seams or tile
offset), that the finish of the wall is suitable to apply
the product and has no weak points.
Fault
Head shower extremely leaky
4
English
Cause
- Head shower soiled / scaled
Wall mount (see page 32)
Ceiling mount (see page 34)

Technical Data

Operating pressure:
Recommended operating pressure:
27378XXX / 27337XXX
26466XXX / 26467XXX
27384XXX / 27385XXX
Hot water temperature:
Thermal disinfection:
The product is exclusively designed for drinking water!

Symbol description

Do not use silicone containing acetic acid!
Dimensions (see page 37)
Flow diagram (see page 37)

Rain

RainAir
Spare parts (see page 44)
XXX = Colors
000 = Chrome Plated
400 = White/Chrome Plated
Cleaning (see page 40)
Operation (see page 34)
Remedy
- Clean / descale head shower
max. 1 MPa
0,15 - 0,4 MPa
0,10 - 0,4 MPa
0,20 - 0,4 MPa
(1 MPa = 10 bar = 147 PSI)
max. 60°C
max. 70°C / 4 min