Parkside PDSS 13 D4 Instrucciones De Utilización Y De Seguridad página 13

Technical specifications
Working pressure: max. 8 bar
Compressed
air quality: clean, oil-free and moisture-free
Volumetric flow rate: Tyre inflator: 40–70 l / min
Air blow gun: 70–130 l / min
A-weighted sound
pressure level (L ): Tyre inflator: 84 dB(A)
Air blow gun: 87.7 dB(A)
A-weighted sound
power level (L ): Tyre inflator: 95 dB(A)
Air blow gun: 98.7 dB(A)
Uncertainty: K = 3 dB(A)
Measured value determined according to
EN 14462 (EN1953:2013).
Package contents
1 pneumatic tyre inflator
with pressure gauge
1 pneumatic air blow gun
Safety advice
PLEASE KEEP ALL SAFETY INSTRUCTIONS
AND INSTRUCTIONS FOR USE FOR FUTURE
REFERENCE!
LIFE AND RISK OF ACCIDENTS
FOR INFANTS AND CHILDREN!
Never leave children unsupervised with the
packaging materials. The packaging material
poses a suffocation hazard. Children frequently
underestimate the dangers. Please always keep
the product out of the reach of children. It is not
a toy.
used, basic safety precautions must be taken in
order to avoid the risk of fire, electric shock or
personal injury. Before first using the product,
please ensure you read and follow these oper-
ating instructions in full and keep them in a safe
2 extension nozzles
1 adapter set (8-piece)
1 set of operating
instructions
DANGER TO
When pneumatic tools are
place. The manufacturer accepts no liability for
losses, damage or personal injury caused by a
failure to follow these operating instructions.
The dangers stated are
foreseeable when using handheld pneumatic
equipment for generalpurpose work. However,
users must themselves consider the risks that can
occur when using the equipment for a specific
application.
DANGER OF INJURY!
Switch off the compressed air supply before
changing tools and settings or performing
maintenance.
EXPLOSION HAZARD! Never
use petrol or other flammable liquids
to clean the product! Residual fumes
in the product could be ignited by sparks and
cause the product to explode. Do not work with
the product in explosion hazard areas where
combustible liquids, gases or dusts are present.
Never work on materials which are or could
potentially be highly flammable or explosive.
For multiple hazards, please ensure you have
read and understood the safety instructions be-
fore installing, operating, repairing, maintaining
or replacing accessory parts, and before work-
ing in the vicinity of the pneumatic tyre inflator
with pressure gauge. Failure to do so can result
in serious bodily injury.
Only qualified and trained operators should set
up, adjust or use the product.
Do not modify the product. Modifications can
reduce the effectiveness of safety precautions
and increase the level of risk for the operator.
The product must be regularly maintained, so as
to verify that the required introduction / safety
instructions for pneumatic tools, rated values
and markings such as rated speed or nominal
air pressure are affixed legibly to the product.
The user must contact the manufacturer to request
replacement labels or markings if this is required.
Do not overload the product.
Never use hydrogen, oxygen, carbon
dioxide or any other bottled gas as
the source of energy for this product,
since this may cause an explosion and lead to
serious injury.
GB/IE 13