Idiomas disponibles
Idiomas disponibles
Problem
Remote control
The remote control
does not respond.
Shower functions
Switching between the
Rearwash and Lady-
wash takes too long.
The water spray inten-
sity is too weak.
The water spray inten-
sity is unstable.
The water temperature
is too high/low.
The Rearwash/Lady-
wash stops automati-
cally.
26
Potential cause
The batteries are almost
out (LED display flashes
white).
The remote control is not
connected to the product
(LED display flashes red).
No batteries are inserted.
The remote control is
defective.
The spray wand retracts
between the functions.
Switching takes approx.
12 seconds.
The water spray intensity
is set to "low".
The water pipe is bent or
crushed.
The water filter is
blocked.
The temperature is set
incorrectly.
The function stops auto-
matically after 2 minutes.
The seat sensor has lost
contact.
Solution
> Replace the batteries.
> Contact [email protected].
> Insert the batteries.
> Contact [email protected].
Normal condition
> Increase the water spray
intensity.
[}App] Home – Rearwash/
Ladywash
> Contact [email protected].
> Contact [email protected].
> Set the temperature.
[}App] Home – Rearwash/
Ladywash
Normal condition
> Sit down again.
> Activate the function.
